4 Stud Black with Diamond Rim 4 Spoke 13 x 7.0 inch
£ 129.60 INC VAT £ 108.00 + VAT
13 inch x 7.0 inch 4 Spoke Classic Road Wheel in Black with diamond machined rim. Blank, 4 Stud
| P.C.D. Range | 4 / 95.25 to 114 |
|---|---|
| Rim Depth | 36 |
| Offset (ET) Range | 00 to 20 |
| Overall Width | 200 |
| ‘C’ Dimension (Backspace) |
100 to 120 |
| ‘A’ Dimension (Frontspace) |
100 to 80 |
| X Factor | 31 to 11 |
| Colour | Black HR |
| Approx Weight | 5.8 to 6.0 |
| Nut / Bolt Type | Conical tuner nut |
| Cap Supplied | RACLB2 |
| Typical Vehicle Fitment | BLANK / 4 STUD |
- Description
- Size Guide
Description
Notes:
Wheels that are drilled from painted blanks will not be re-painted after drilling.
Some items are special order, a minimum order quantity of 100 pieces per fitment will be required.
Road wheels include centre cap & logo but exclude nuts or bolts.
All prices are in GBP£ and are ex-works, Ollerton, Nottinghamshire, NG22 9QW, UK.
Some wheels will require the use of sleeve or tuner nuts / bolts which will be supplied at an extra cost.
‘ C ‘ Dimension is measured from the inner most part of the wheel to the mounting face, if in doubt a schematic diagram is available.
‘ A ‘ Dimension is measured from the outer most part of the wheel to the mounting face, if in doubt a schematic diagram is available.
‘ X Factor ‘ is measured from the mounting face to the middle of the back of the spoke, if in doubt a schematic profile is available.
All weights & dimensions are approximate & may vary slightly.
HR = With diamond machined rim. AO = All over painted. PCD = Pitch Circle Diameter.
